DEWINTER INVERTED METALLURGICAL MICROSCOPE
MODEL: DMI ULTIMA
Trinocular Observation Head
Siedentopf observation head inclined at 45°.
Diopter adjustment ring on ocular tube (±5).
Interpupillary distance from 52mm to 75mm.
Focusable vertical phototube for Microphotography.
Eyepiece ( Anti fungus)
Wide ï¬eld eyepiece 10X (paired) F.O.V. 20mm.
Objectives (Inï¬nity corrected)
M Long working distance plan 5X
M Long working distance plan 10X
M Long working distance plan 20X
M Long working distance plan 50X
M Long working distance plan 100X (S.L.) Dry
Epi-Koehlerâs illumination. Aperture iris diaphragm and field iris diaphragm 24V/100W halogen lamp. Adjustable brightness. Filter wheel fixed in light path with blue, green & yellow filters.
Co-axial focusing system with large knobs, PRE-FOCUSING LEVER & TENSION ADJUSTMENT RING.
Quadruple nosepiece on ball bearing.
Mechanical stage is 350mm X 208mm and moving range 50mmX50mm
Mechanical stage has low positioned co-axial controls on ball bearing guide ways.
Side port with phototube for micro photography.
Analyzer rotatable at 360°. Polarizer & Analyzer can be slide in/out on the optical path.
24V/100W halogen tungsten bulb, operating manual, dust cover, guarantee card and Styrofoam molded pack.